Craftsmanship & Atelier20 July 2025•6 min read

The Craft Behind Every Artiviesta Lamp: Wood, Laser, and Light

Name: Artiviesta
Address: 451 Wall Street, London, E1 6AN, GB
Price range: £37.99

A look inside the workshop: how responsibly sourced plywood, laser cutting, and careful hand-finishing come together in London.

Marko Miholić

Founder & Artisan Woodcrafter • London Studio

The Craft Behind Every Artiviesta Lamp: Wood, Laser, and Light

Marko Miholić Studio • London UK

Every Artiviesta lamp starts as a sheet of real wood and ends up as a little lit picture. In between sit three parts of the work we do in our London studio: choosing good wood, cutting the design precisely, and finishing it by hand. None of it happens on a production line.

It starts with real wood

We use responsibly sourced natural wood, chosen for a clean, even grain. Wood is a living material, so no two sheets look the same. That is the charm of it: your lamp has its own grain and tone, even though the design matches the one beside it on the shelf.

Thin composite boards can warp or look flat. Real wood holds fine detail well and feels warm to the touch, so you can see and feel the difference once the lamp is in your hands.

“When you work with real wood, you are working with something that grew. No two lamps carry the same grain.”
— Marko Miholić, Artiviesta Founder

Direct Answer: Artiviesta lamps are made from responsibly sourced natural wood because it is stable, takes fine detail well and gives every lamp a unique grain.

Laser-cut detail, then assembled by hand

The design is cut with a laser, which is how we get clean, fine details like whiskers and feathers. The laser cuts each piece apart, and the parts then slot together to form the lamp.

The pieces are assembled by hand, never on a line. Each lamp is checked before it ships, including the fitting of the warm white LED inside.

Hand-sanded and sealed with a non-toxic finish

After cutting, each piece is sanded by hand to soften the edges and leave the surface smooth to the touch. We then seal it with a non-toxic finish that protects the wood and deepens its colour.

Finally the warm white LED is fitted and the lamp is switched on for a check before it is wrapped. It arrives ready to use: just plug it into any standard 5V USB socket and switch it on.

Direct Answer: Every Artiviesta lamp is laser-cut and assembled by hand in London, then hand-sanded and sealed with a non-toxic finish, so it is smooth, safe and built to last.

Studio Catalog

Quick Answers

Frequently Asked Questions

Where are Artiviesta lamps made?

Direct Answer: Every lamp is designed, laser-cut and hand-finished at our studio in London by Marko Miholić and his small team.

How do I clean and look after my wooden lamp?

Direct Answer: Dust it gently with a soft dry cloth. Avoid water and harsh cleaners, and keep it away from damp. That keeps the wood looking its best.

What if I have any issues with the lamp?

Direct Answer: Get in touch with the studio through the contact page. Every lamp is covered by a 21-day money-back return policy, and we always sort out any problems.

Gift Guides • 4 min read